+
  • z39.jpg
  • Wing Tek (Drilling) Screw Flat Head Self Drilling Metal Screws with Wings (1).jpg
  • Wing Tek (Drilling) Screw Flat Head Self Drilling Metal Screws with Wings (2).jpg
  • Wing Tek (Drilling) Screw Flat Head Self Drilling Metal Screws with Wings (1).png

Flat Head Drilling W/Wings

Wing Tek Screw

Categories:

Views:


Product Features

Thread size:#7 #8 #10 #12 #14 (M3.9 to M6.3) Length:1" to 3" (25 to 75mm) Recess type:Phillip;Torx;Square; Head type:Flat 80°countersunk;Flat 90° countersunk;Flat 100° countersunk; Thread type:Type BSD; Point:drill point with 2 wings Finish:Zinc Plated (clear / white / yellow), Phosphate (grey or black),Coating (Geomet, Dacrotized, Ruspert etc.), Drill capacity:Steel plate thickness 1.0mm to 5.0mm;

Wing Tek (Drilling) Screw Flat Head Self Drilling Metal Screws with Wings For fastening timber and composite boards to metal where a flush finish is required. There are potential issues with using wing self-drilling screws for decking applications. If in any doubt, look for screws specifically designed for fixing timber decking boards to steel.When fastening thicker materials such as from wood to metal, it is necessary to use a screw with “wings” on the shaft or a pilot point. The key features on YourChoice factory to consider when selecting a suitable fastener for a specific application.For fixing timber to metal.For use in pressure treated lumber Wing ream hole in wood preventing "jacking action

Product introduction



Next:

ONLINE CONSULTING


Product name:

Submit